{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Hand reamer H7 6 mm
Artikelnummer: 160150 6
Klantartikelnummer:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Offertes
Set met prijsvoordeel
Productdetails
Technische gegevens
| Nominal ⌀ DC | 6 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 47 mm | |
| Overhang L1 | 57 mm | |
| Overall length L | 93 mm | |
| Number of cutting edges Z | 6 | |
| Shank square □ | 4.5 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identificatienummers en classificaties
| Artikelnummer | 160150 6 | |
| EAN/GTIN | 4045197937186 | |
| Nummer fabrikant | 160150 6 |
Toepassingstabel
N
P
P
P
Omschrijving
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads en documenten
Vergelijk met soortgelijke producten
Dit artikel |
Aanbevelingen |
|
|---|---|---|
| Number of cutting edges Z | 6 | 6 |
| Overhang L1 | 57 | 55 |
| Nominal ⌀ DC | 6 | 6 |
| Standard | DIN 206 B | DIN 8093 |
| Tool material | HSS | Carbide K10 |
| Tolerance | H7 | H7 |
| Application for type of drilling | for through hole | for through holes |