{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide-tipped hammer drill SDS-plus 30X450 mm
Article no.: 789040 30X450
Article code:
Click to enlarge image
Click to enlarge image
Carbide head with 3 cutters with auxiliary cutting edges (drilling head from size 30×450).
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Carbide
- Use with impact / without impact: Impact drilling
- Shank: SDS Plus
Product details
Technical Data
| ⌀ | 30 mm | |
| overall length | 450 mm | |
| Flute length | 400 mm | |
| Tool material | Carbide | |
| Use with impact / without impact | Impact drilling | |
| Shank | SDS Plus | |
| Type of product | Masonry drill |
Identification numbers & Classifications
| Article number | 789040 30X450 | |
| EAN / GTIN | 4062406135874 | |
| Manufacturer number | 789040 30X450 |
Description
Version:
Drill head with square cross-section. 4×90° geometry with specially developed equal height tips and stable shoulders ensure precisely dimensioned holes for professional setting of anchors and secure plug attachment. 4-flute drilling heads for smooth drilling with low vibration and optimum guidance in the drilled hole. Radially shaped reinforcement protection: prevents jamming when hitting reinforcements and increases the working life.
3-piece sturdy carbide head with reinforced centre point. Sturdy auxiliary cutting edges support the advance and thus permit sustained high performance and constant precision.
Advantage:
- Short spiral starts ensure a smooth evacuation of the drill dust.
- Wear marks: for evaluation whether the tool is still suitable for drilling holes suitable for insertion of plugs.
- 4×4 design permits a precise radial run-out and minimise wear and loss of frictional grip.
Application:
For drilling concrete, natural stone, and masonry − with very high drilling comfort.