{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque wrench without scale with reversible ratchet 10 N·m
Article no.: 657460 10
Article code:
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±2
Product details
Technical Data
| maximum torque | 10 Nm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±2 % | |
| Overall length L | 155 mm | |
| Torque range | 2 Nm - 10 Nm | |
| Weight | 190 g | |
| Square drive | 1/4 in | |
| Release signalling | acoustic; haptisk | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | without setting scale (requires torque analyser) | |
| Feedback | triggering | |
| Reversible reading | Nm | |
| Measurement process | Torque | |
| Adjustable trigger value | preset | |
| Standard | DIN EN ISO 6789 | |
| Lever length including factory calibration reference dimension [l3] | 112 mm | |
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 657460 10 | |
| EAN / GTIN | 4045197995971 | |
| Manufacturer number | 657460 10 |
Description
Version:
One-armed torque wrench without a setting scale. Set the desired torque value with setting tool No. 657452 size 1 in conjunction with a suitable test device.
With built-in reversible ratchet with ejector − for left-hand and right-hand tightening. Torque wrench, only right-hand triggering.
With built-in reversible ratchet with ejector − for left-hand and right-hand tightening. Torque wrench, only right-hand triggering.
Function:
On reaching the set torque value the wrench triggers giving a “signal”(audible and perceptible) and is then immediately ready for use again.
Application:
For controlled screw tightening etc. to specified torques in batch productions.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
±2% of the set value.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque