{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque wrench DREMOMETER with fixed square drive 12 N·m
Article no.: 657000 12
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±3
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| maximum torque | 12 Nm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±3 % | |
| Test certificate | Manufacturer’s test certificate | |
| Series | DREMOMETER | |
| Overall length L | 211 mm | |
| Torque range | 2.5 Nm - 12 Nm | |
| Torque range | 22.5 lbfin - 106 lbfin | |
| Scale graduation, 1 graduation = | 0.5 Nm | |
| Weight | 320 g | |
| Square drive | 1/4 in | |
| Display | analogue | |
| Release signalling | acoustic; haptisk | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Reversible reading | Nm; lbfin | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Lever length without plug-in head [l1] | 130 mm | |
| Lever length including factory calibration reference dimension [l3] | 130 mm | |
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 657000 12 | |
| EAN / GTIN | 4002805929063 | |
| Manufacturer number | 1957694 |
Description
Version:
Handy, robust construction, light weight. All heavily loaded parts high-quality steel. Fixed square drive (no ratchet).
Units of measure: Nm, lbfin.
With body of glass fibre reinforced plastic and 2-component handle.
With body of glass fibre reinforced plastic and 2-component handle.
Function:
On reaching the set torque value the wrench triggers giving a “signal” (acoustic and perceptible) and is then immediately ready for use again.
The desired torque is set using a captive hexagon L-wrench that is pulled out from the end of the handle. The set torque can be easily read on the scale. No inadvertent changes to the setting can be made whilst working.
The desired torque is set using a captive hexagon L-wrench that is pulled out from the end of the handle. The set torque can be easily read on the scale. No inadvertent changes to the setting can be made whilst working.
Application:
For medium to larger series production.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
|
Torque wrench DREMOMETER with fixed square drive 12 N·m |
||
| Reversible reading | Nm ;lbfin | Nm |
| Square drive | 1/4 | 1/4 |
| Direction of tightening | Right-hand tightening | For right and left-hand tightening |
| Torque range | 2.5 ;12 | 2.4 ;12 |
| Weight | 320 | 400 |
| Adjustable trigger value | adjustable | non-adjustable |
| Lever length including factory calibration reference dimension [l3] | 130 | 180 |