{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque wrench with reversible ratchet 320 N·m
Article no.: 656500 320
Article code:
Click to enlarge image
Click to enlarge image
Locking at the end of the handle.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
- Direction of tightening: For right and left-hand tightening
- Torque measuring accuracy: ±2
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| maximum torque | 320 Nm | |
| Direction of tightening | For right and left-hand tightening | |
| Torque measuring accuracy | ±2 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 659 mm | |
| Torque range | 60 Nm - 320 Nm | |
| Scale graduation, 1 graduation = | 2 Nm | |
| Weight | 2,300 g | |
| Square drive | 1/2 in | |
| Display | analogue | |
| Release signalling | akustisk; haptisk; optisk | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Reversible reading | Nm | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Lever length including factory calibration reference dimension [l3] | 566 mm | |
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 656500 320 | |
| EAN / GTIN | 4000896025367 | |
| Manufacturer number | 6123-1CT |
Description
Version:
Handy and very compact single-arm torque wrench, adjustable by scale and self-triggering. Extremely high repeat accuracy, since high quality materials are used throughout. Wearing parts, such as compression springs, are specially pre-treated and sorted. Reversible ratchet for left-hand and right-hand tightening.
With built-in reversible ratchet − for left and right hand tightening.
Units of measure: Nm
With built-in reversible ratchet − for left and right hand tightening.
Units of measure: Nm
With HiPer fine tooth reversible ratchet (90 teeth, 4° actuation angle).
Function:
The wrench triggers giving a “signal” (clearly audible acoustic tone and noticeable vibration) and afterwards is immediately ready for use again.
Application:
For medium to larger batch productions.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Of the displayed value only for right-hand tightening: ±2 %.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
Calibration is only possible for right-hand tightening.
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
|
Torque wrench with reversible ratchet 320 N·m |
||
| Square drive | 1/2 | 1/2 |
| Torque range | 60 ;320 | 60 ;320 |
| Torque measuring accuracy | ±2 | ±3 |
| Standard | DIN EN ISO 6789 | DIN EN ISO 6789 |
| Measurement technology | mechanical | mechanical |
| Connection format | Push-through square drive (ratchet) | Push-through square drive (ratchet) |
| Setting the trigger value | with adjustment scale | with adjustment scale |