{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Electronic torque wrench, maximum torque: 12N·m
Article no.: 655345 12
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Application exampleOptional accessories: Coin driver No. 66 4310 / 66 4311 for unscrewing without damage, for extracting blanking plugs.
Click to enlarge image
For a description of the legend, see description text.
- Direction of tightening: For right and left-hand tightening
- Torque measuring accuracy: ±2; ±3
- Exchangeable tool: Plug-in head
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| maximum torque | 12 Nm | |
| Direction of tightening | For right and left-hand tightening | |
| Torque measuring accuracy | ±2 %; ±3 % | |
| Exchangeable tool | Plug-in head | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 216 mm | |
| Torque range | 2.4 Nm - 12 Nm | |
| Resolution | 0.01 Nm | |
| Weight | 650 g | |
| Square drive | 1/4 in | |
| Display | digital | |
| Release signalling | optisk; akustisk | |
| Trigger principle | mechanical short-travel release | |
| Power supply | Battery-powered | |
| Number of batteries contained | 1 | |
| Battery type | LR3 | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | electronic | |
| Data can be recorded | yes | |
| Setting the trigger value | digital, adjustable | |
| Feedback | displaying | |
| Reversible reading | Nm; lbfft; lbfin; kgfm | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Lever length including factory calibration reference dimension [l3] | 176.3 mm | |
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 655345 12 | |
| EAN / GTIN | 4045197503817 | |
| Manufacturer number | 655345 12 |
Description
Version:
Robust torque wrench with impact resistant casing, 2-component handle, large display and reversible ratchet. Easy operation using large input buttons. Visual and acoustic signal indicates achievement of the set torque visually and audibly. Two working modes; selectable between peak value display and following display. The working memory can store up to 50 torque settings.
Units of measure: Nm, lbfft, lbfin, kgfm.
Units of measure: Nm, lbfft, lbfin, kgfm.
Captive push-through ratchet with ejector. Any desired force. Irrespective of where the wrench is held, the measurement always remains accurate.
Application:
Torque control; controlled tightening of screws in a single operation or for small batch production.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Clockwise ± 2 %, anticlockwise ± 3 %.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.