{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Lightweight revolving lathe centre 5
Article no.: 320650 5
Article code:
Product details
Technical Data
| Morse taper | MK5 | |
| Body ⌀ D | 58 mm | |
| Reach B | 104 mm | |
| largest centre point ⌀ 60° A | 30 mm | |
| maximum radial run-out | 0.01 mm | |
| for workpiece weight | 1,600 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320650 5 | |
| EAN / GTIN | 4019208000183 | |
| Manufacturer number | 005490 |
Description
Version:
- Point angle 60°.
- Lightweight version.
- Precision roller bearings for high concentricity.
- maintenance-free.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
Mainly used for machining small and smallest parts on all types of lathes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Lightweight revolving lathe centre 5 |
||
| for workpiece weight | 1,600 | 800 |
| Body ⌀ D | 58 | 96 |
| maximum radial run-out | 0.01 | 0.01 |
| Morse taper | MK5 | MK5 |
| Reach B | 104 | |
| largest centre point ⌀ 60° A | 30 | |
| Type of product | Centring drill | Centring drill |