{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot cutting insert with chamfer H7, TiN, for slot width m: 4mm
Article no.: 290363 4
Article code:
Product details
Technical Data
| for slot width m | 4 mm | |
| Coating | TiN | |
| for precision fit | H7 | |
| Blade width w | 4.012 mm | |
| Groove depth t | 2.07 mm | |
| Tip thickness b | 7 mm | |
| Chamfer | 0.2 mm×45° | |
| Tool material | HSS | |
| Type of product | Keyway broaching and profile slotting tool |
Identification numbers & Classifications
| Article number | 290363 4 | |
| EAN / GTIN | 4045197881427 | |
| Manufacturer number | 290363 4 |
Application Table
N
N
N
P
P
P
P
P
M
M
S
K
N
N
Description
Version:
With TiN coating.
Suitable for regrinding.
Suitable for regrinding.
Application:
For producing slots according to DIN 6885, DIN 138 and factory standards.
For slot widths with tolerance JS9, use cutter inserts with tolerance H7.
For slot widths with tolerance JS9, use cutter inserts with tolerance H7.
Note:
- Special sizes (slot widths) available on request.
- Detailed application values can be found in our application ToolScout.
From slot width 16 mm it is essential to perform two passes. The first pass must be performed for approx. half the slot width (e.g. 10 mm for a desired slot width of 18 mm). For the first pass it is recommended that a cutter insert without chamfer (290370 – 290379) is used, as this means greater slot depths are possible.