{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DNMG 150604, Grade: HB7120-1
Article no.: 250760 HB7120-1
Article code:
Product details
Technical Data
| ISO code indexable insert | DNMG 150604 | |
| Corner radius | 0.4 mm | |
| Grade | HB7120-1 | |
| Tool material | Carbide | |
| Main application | M | |
| Cutting conditions | continuous | |
| Chip breaker | VM | |
| Tolerance | M | |
| Cutting depth ap | 0.5 mm - 5 mm | |
| Feed f | 0.2 mm/rev. - 0.5 mm/rev. | |
| Cutting speed vc main application | 80 m/min - 260 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 250760 HB7120-1 | |
| EAN / GTIN | 4045197819796 | |
| Manufacturer number | 250760 HB7120-1 |
Application Table
M
M
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
DNMG 150604, Grade: HB7120-1 |
||||
| Number of changes/inserts | 4 | 4 | 4 | 4 |
| ISO code indexable insert | DNMG 150604 | DNMG 150604 | DNMG 150604 | DNMG 150604 |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Finishing |
| Cutting depth ap | 0.5 mm - 5 mm | 0.5 mm - 5 mm | 0.5 mm - 5 mm | 0.5 mm - 5 mm |
| Grade | HB7120-1 | HB7140-1 | HBT130 | HB7130-2 |
| Chip breaker | VM | VM | MM | VM |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |