{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO-Code Wendeschneidplatte | DNMG 150608 | |
Eckenradius | 0,8 mm | |
Sorte | CA025P | |
Schneidstoff | Carbide | |
Beschichtung | CVD | |
Hauptanwendung | P | |
Schnittbedingung | slightly interrupted | |
Spanbrecher | PQ | |
Schnitttiefe ap | 0,2 mm - 2,5 mm | |
Vorschub f | 0,13 mm/U - 0,4 mm/U | |
Schnittgeschwindigkeit vc Hauptanwendung | 105 m/min - 435 m/min | |
Anzahl Wechsel/Schneiden | 4 | |
Schlicht/Schrupp-Zuordnung | Finishing | |
Type of product | Indexable insert for turning |
Article number | 250697 CA025P | |
Manufacturer number | TMH00027 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
DNMG 150608, Grade: CA025P |
on request
In stock
482 pieces in stock
from
1
Pieces
€ 17,28
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 14,40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
414 pieces in stock
from
1
Pieces
€ 17,28
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 14,40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
252 pieces in stock
from
1
Pieces
€ 17,28
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 14,40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
419 pieces in stock
from
1
Pieces
€ 19,32
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 16,10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
655 pieces in stock
€ 10,70
plus VAT at the current rate
Prices plus delivery costs
|
|
Anzahl Wechsel/Schneiden | 4 | 4 | 4 | 4 | 4 | 4 |
Eckenradius | 0,8 mm | 0,8 mm | 0,8 mm | 0,8 mm | 0,8 mm | 0,8 mm |
ISO-Code Wendeschneidplatte | DNMG 150608 | DNMG 150608 | DNMG 150608 | DNMG 150608 | DNMG 150608 | DNMG 150608 |
Schlicht/Schrupp-Zuordnung | Finishing | Nabewerken | Nabewerken | Nabewerken | Voor-/nabewerken | Voor-/nabewerken |
Schnitttiefe ap | 0,2 mm - 2,5 mm | 0,3 mm - 2 mm | 0,3 mm - 2 mm | 0,3 mm - 2 mm | 0,3 mm - 2 mm | 0,5 mm - 2 mm |
Vorschub f | 0,13 mm/U - 0,4 mm/U | 0,1 mm/omw. - 0,4 mm/omw. | 0,1 mm/omw. - 0,4 mm/omw. | 0,1 mm/omw. - 0,4 mm/omw. | 0,15 mm/omw. - 0,35 mm/omw. | 0,1 mm/omw. - 0,4 mm/omw. |
Schnittgeschwindigkeit vc Hauptanwendung | 105 m/min - 435 m/min | 150 m/min - 400 m/min | 150 m/min - 500 m/min | 120 m/min - 350 m/min | 150 m/min - 400 m/min | 120 m/min - 330 m/min |