{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KOMET KUB Quatron® indexable drill Combination shank 24,5 mm
Article no.: 235500 24,5
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Find similar products here:
Product details
Technical Data
| Series | KUB Quatron® | |
| Nominal ⌀ D | 24.5 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 50 mm | |
| Overhang LA | 74 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| ISO code indexable insert | SOEX 07T308 23-.. | |
| Pack of insert screws | 239652 8IP1 (1.3 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 134 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 235500 24,5 | |
| EAN / GTIN | 4047109047259 | |
| Manufacturer number | U10 22450 |
Description
Version:
With combination shank.
- Optimised coolant channels for reliable chip evacuation.
- Point angle 174° for almost flat-bottomed holes.
Application:
- For stationary and rotating use.
- For difficult drilling conditions (rolling scale, sloping surfaces of castings, interrupted cutting).
- For bores with tolerance ± 0.2 mm.
With indexable inserts No. 236520 − 236576.
Supplied with:
Clamp screws (without indexable inserts).
Note:
Further sizes available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
KOMET KUB Quatron® indexable drill Combination shank 24,5 mm |
||||
| Number of cutting edges Z | 1 | 1 | 1 | 1 |
| Drill depth for indexable insert drill up to | 2×D | 2×D | 2×D | 2×D |
| Use for drilling | Centre drilling ;limited cross-drilling ;oblique spot drilling ;Cross-drilling ;Centre drilling ;Aperture ;oblique exit ;convex | Centre drilling ;oblique spot drilling ;limited cross-drilling ;Aperture ;oblique exit ;convex | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited oblique spot drilling |
| ISO code indexable insert | SOEX 07T308 23-.. | WOEX 040304 | SOGX 080407 | SOMT093608 / XOMT093605 |
| Shank ⌀ Ds | 32 | 25 | 32 | 32 |
| Shank length Ls | 60 | 56 | 60 | 60 |
| Reach L1 | 50 | 50 | 24.5 | 51 |