{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC17, with bore, ⌀ D / number of teeth Z: 40/4mm
Article no.: 227510 40/4
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 15.7 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 16 mm | |
| ⌀ D3 | 33 mm | |
| Circular interpolation milling ⌀ Dmin | 73 mm | |
| Circular interpolation milling ⌀ Dmax | 78 mm | |
| Ramping angle αmax | 0.45 degrees | |
| Ramping length L for αmax | 31.6 mm | |
| suitable indexable insert | BDMT 170408 | |
| Insert screw | 229709 (T15; 3.5 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227510 40/4 | |
| EAN / GTIN | 4960664452736 | |
| Manufacturer number | THN03420 |
Description
Version:
Long cutting edges permit exceptionally large cutting depths.
Small number of cutting edges.
Small number of cutting edges.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Indexable milling cutter 90° MEC17, with bore, ⌀ D / number of teeth Z: 40/4mm |
|||||||||
| Mounting bore ⌀ | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
| Milling application | Circular milling; Ramping; End milling | Corner milling | Corner milling | End milling | End milling | End milling | Corner milling | Corner milling | End milling |
| Overall length Ltot | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm |
| suitable indexable insert | BDMT 170408 | SO.. 0836.. | SO.. 0836.. | SOMT 09T304 | AP.. 16.. | SOMT 09T304 | LO.. 130708 | LO.U0904.. | AP.. 16.. |
| Shank type | with bore | with bore | with bore | with bore | with bore | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |