{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 2 | |
Shank type | with threaded shank | |
Milling application | Circular milling; Plunging; Ramping | |
Machining strategy | HPC | |
Through-coolant | yes | |
⌀ D3 | 8 mm | |
maximum cutting depth ap max | 1.5 mm | |
maximum cutting depth ap max for LD geometry | 3.5 mm | |
Overall length Ltot | 35 mm | |
Mounting thread M | M12 | |
Circular interpolation milling ⌀ Dmin | 33 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Ramping angle αmax | 2.79 degrees | |
Ramping length L for αmax | 7.4 mm | |
suitable indexable insert | SOMT.. | |
Indexable insert size | 10 | |
Insert screw | 229717 (15IP; 3.5 Nm) | |
Type of product | Copy mill |
Article number | 222060 25/2 | |
EAN / GTIN | 4960664712458 | |
Manufacturer number | THN07550 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() High feed rate milling cutter MFH Harrier 25/2 mm |
||||
Mounting thread M | M12 | M12 | M12 | M12 |
Milling application | Circular milling ;Plunging ;Ramping | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging |
suitable indexable insert | SOMT.. | XD.. 09T308 | XDM.090416 | XOMU094812 |
Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
Cutting edge ⌀ DC | 25 | 25 | 25 | 25 |
Machining strategy | HPC | HPC | HPC | HPC |
Ramping length L for αmax | 7.4 | 8.5 | 10.43 | 12.55 |