{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH mini 25/5 mm
Article no.: 221960 25/5
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with thread | |
| Milling application | Circular milling; Ramping; Plunging | |
| Machining strategy | HPC | |
| Through-coolant | yes | |
| ⌀ D3 | 18 mm | |
| maximum cutting depth ap max | 1 mm | |
| Overall length Ltot | 35 mm | |
| Mounting thread M | M12 | |
| Circular interpolation milling ⌀ Dmin | 43 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 1.05 degrees | |
| Ramping length L for αmax | 16.3 mm | |
| suitable indexable insert | LOGU 0303.. | |
| Insert screw | 229713 (8IP; 1.2 Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221960 25/5 | |
| EAN / GTIN | 4960664741113 | |
| Manufacturer number | THN07516 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH mini 25/5 mm |
||
| Mounting thread M | M12 | M12 |
| Milling application | Circular milling ;Ramping ;Plunging | End milling ;Circular milling ;Ramping |
| Overall length Ltot | 35 | 35 |
| suitable indexable insert | LOGU 0303.. | CPHX 0602.. |
| Cutting edge ⌀ DC | 25 | 25 |
| maximum cutting depth ap max | 1 | 2.5 |
| Type of product | Copy mill | Copy mill |