{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter 7792VX 25/4 mm
Article no.: 221900 25/4
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | Plain shank | |
| Milling application | Circular milling; Plunging; Ramping | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 14 mm | |
| maximum cutting depth ap max | 0.9 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 210 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 39 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 0.87 degrees | |
| Ramping length L for αmax | 13.2 mm | |
| suitable indexable insert | XD.. | |
| Indexable insert size | 06 | |
| Insert screw | 229916 (T7; 0.8 Nm) | |
| Setting angle κ | 10 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221900 25/4 | |
| EAN / GTIN | 2050002058477 | |
| Manufacturer number | 5666409 |
Description
Description:
The unique design of the indexable inserts together with their approach angle in the milling body greatly reduces the radial forces and diverts them into the axial direction. Particularly thick indexable inserts with 4 cutting edges for the heaviest duties and high cost-effectiveness. The tool has particular advantages for face milling and milling deep pockets. With its ground wiper chamfer it is equally well suited also to plunge milling and finish milling operations.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter 7792VX 25/4 mm |
||
| Overall length Ltot | 210 | 180 |
| Through-coolant | yes | yes |
| suitable indexable insert | XD.. | ANGX10T308ZE.R |
| ⌀ D3 | 14 | 19 |
| Circular interpolation milling ⌀ Dmin | 39 | 44 |
| Ramping angle αmax | 0.87 | 1.15 |
| Type of product | Copy mill | Copy mill |