{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HAIMER MILL end mill 12 mm
Article no.: 220286 12
Article code:
- Tool material: Solid carbide
- Norm: DIN 6527
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | AlTiN | |
| Tool material | Solid carbide | |
| Norm | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 32 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 26 mm | |
| Overhang length L1 incl. recess | 36.5 mm | |
| Recess ⌀ D1 | 11.4 mm | |
| Overall length L | 84 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.24 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.066 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.078 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 220286 12 | |
| EAN / GTIN | 4034221161604 | |
| Manufacturer number | F2004NNH1200CDA |
Application Table
N
480
N
480
N
350
P
275
P
255
P
210
P
190
M
95
M
75
S
35
K
155
Description
Version:
For general-purpose use in steel materials and high-alloy steels, especially stainless steel. With cylindrical core for optimised tool stiffness when milling slots. Reliable processes guaranteed when ramping and during circular interpolation milling thanks to special end face geometry.
Note:
Tool holders with the SAFE-LOCK pull-out protection can be found under clamping technology.
For HB use order No. 220287.
For HB use order No. 220287.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HAIMER MILL end mill 12 mm |
|||
| Coating | AlTiN | AlCrN | TiAlN |
| Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D | Full slot cutting depth 1×D ;Full slot cutting depth 1×D |
| Cutting edge ⌀ DC | 12 | 12 | 12 |
| Flute length Lc | 26 | 16 | 33 |
| Helix angle characteristic | unequal spacing | unequal spacing | unequal spacing |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 12 | 12 | 12 |