{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Tang 90° tangential high-performance shoulder mill wide pitch 25/3 mm
Article no.: 215960 25/3
Article code:
- Setting angle κ: 90
- Milling application: Corner milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Serie | Power Tang | |
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | with threaded shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Corner milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum cutting depth ap max | 8 mm | |
| Overall length Ltot | 30 mm | |
| ⌀ D1 h6 | 12.5 mm | |
| ⌀ D2 | 23 mm | |
| Mounting thread M | M12 | |
| suitable indexable insert | LO.U0904.. | |
| Pack of insert screws | 219868 2 (8IP; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215960 25/3 | |
| EAN / GTIN | 4045197939951 | |
| Manufacturer number | 215960 25/3 |
Description
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
GARANT Power Tang 90° tangential high-performance shoulder mill wide pitch 25/3 mm |
||||
| Number of cutting edges Z | 3 | 3 | 3 | 3 |
| Mounting thread M | M12 | M12 | M12 | M12 |
| Milling application | Corner milling | Circular milling ;Circular milling ;Ramping | End milling ;Circular milling ;Ramping | End milling |
| Overall length Ltot | 30 | 35 | 35 | 35 |
| Through-coolant | yes | yes | yes | yes |
| suitable indexable insert | LO.U0904.. | AP.. 1335.. | AP.. 1003 | SO.. 0836.. |
| Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank |