{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill, uncoated, ⌀ e8 DC: 20mm
Article no.: 209320 20
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 20 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | no | |
| Flute length Lc | 41 mm | |
| Overhang length L1 incl. recess | 54 mm | |
| Recess ⌀ D1 | 19.8 mm | |
| Overall length L | 104 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in PMMA | 0.085 mm | |
| Feed fz for side milling in PMMA | 0.12 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 209320 20 | |
| EAN / GTIN | 4045197479976 | |
| Manufacturer number | 209320 20 |
Application Table
N
180
N
140
N
105
N
190
N
140
N
160
N
140
N
120
N
180
N
150
N
180
Description
Version:
Special geometry for machining aluminium and plastics.
Application:
Extremely sharp cutting edges, especially for machining plastics.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Solid carbide slot drill, uncoated, ⌀ e8 DC: 20mm |
|||||||||||
| Through-coolant | no | no | no | no | no | no | no | no | no | no | no |
| Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
| Flute length Lc | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 40 mm | 41 mm | 41 mm | 41 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 20 degrees | 20 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 20 degrees | 45 degrees | 45 degrees | 42 degrees | 42 degrees |
| Type | W | W | W | W | W | W | W | W | W | W | W |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |