GARANT Master Steel solid carbide torus cutter HPC 20/1,0 mm

Article no.: 206354 20/1,0

⌀ D_C / R₁ (mm):

Quantity

Product details

Series		Master Steel
Cutting edge ⌀ D_C		20 mm
Coating		TiAlN
Tool material		Solid carbide
Standard		DIN 6527
Type		N
Tolerance nominal ⌀		f8
No. of teeth Z		4
Helix angle		38 degrees
Helix angle characteristic		unequal spacing
Spacing of the cutters		unequal spacing
Direction of infeed		horizontal, oblique and vertical
Cutting width a_e for milling operation		Full slot cutting depth 1×D; 0.3×D for side milling
Shank		DIN 6535 HB to h6
Through-coolant		no
Machining strategy		HPC
Flute length L_c		41 mm
Corner radius R₁		1 mm
Overhang length L₁ incl. recess		52 mm
Recess ⌀ D₁		19.8 mm
Overall length L		104 mm
Shank ⌀ D_s		20 mm
Feed f_z for slot milling in steel < 900 N/mm²		0.1 mm
Feed f_z for side milling in steel < 900 N/mm²		0.13 mm
Colour ring		green
Type of product		Torus cutter

260

240

190

180

150

250

Tolerance: Corner radius R₁ = ±0.01 mm.

HPC milling cutters with various corner radii for all radial transitions.
Optimised flute form, eccentric relief ground, wide chip space.

	This article	Recommendations
	GARANT Master Steel solid carbide torus cutter HPC 20/1,0 mm	HOLEX Pro Steel solid carbide torus cutter HPC 20/1,0 mm	GARANT Master Steel solid carbide torus cutter HPC 20/1,0 mm
Overhang length L₁ incl. recess	52	54	74
Cutting width a_e for milling operation	Full slot cutting depth 1×D ;0.3×D for side milling	Full slot cutting depth 1×D ;Full slot cutting depth 1×D	Full slot cutting depth 1×D ;0.3×D for side milling
Shank	DIN 6535 HB to h6	DIN 6535 HB to h6	DIN 6535 HB to h6
Feed f_z for side milling in steel < 900 N/mm²	0.13	0.13	0.13
Machining strategy	HPC	HPC	HPC
Shank ⌀ D_s	20	20	20
Type of product	Torus cutter	Torus cutter	Torus cutter