{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide torus cutter HPC, ZOX, ⌀ f8 DC / R1: 12/1,0mm
Article no.: 206260 12/1,0
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: f8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | ZOX | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.3×D for side milling; 0.03×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 26 mm | |
| Corner radius R1 | 1 mm | |
| Overhang length L1 incl. recess | 36 mm | |
| Recess ⌀ D1 | 11 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.065 mm | |
| Feed fz for copy milling in short-chipping aluminium | 0.065 mm | |
| Shank tolerance | h6 | |
| Colour ring | yellow | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 206260 12/1,0 | |
| EAN / GTIN | 4045197300942 | |
| Manufacturer number | 206260 12/1,0 |
Application Table
N
500
N
480
N
240
N
200
N
240
Description
Version:
With strong core, special chip breaker recesses and large polished flutes.
New generation of high performance end mills in the HPC machining range.
New generation of high performance end mills in the HPC machining range.
Application:
Especially for high speed machining in mould and tool making for copy milling.
Note:
NEW GENERATION AVAILABLE! Recommended successor product is No. 206255.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide torus cutter HPC, ZOX, ⌀ f8 DC / R1: 12/1,0mm |
|||||
| Coating | ZOX | uncoated | DLC | TiAlN | DLC |
| Recess ⌀ D1 | 11 mm | 11 mm | 11 mm | 11.6 mm | 11.8 mm |
| Flute length Lc | 26 mm | 26 mm | 26 mm | 26 mm | 26 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Type | W | W | W | N | W |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |