{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Taper reamer 1:10 15X35 mm
Article no.: 161000 15X35
Article code:
- Tool material: HSS
- Standard: Manufacturer’s standard
- Taper ratio: 1:10
- Through-coolant: no
- Application for type of drilling: for through holes
Product details
Technical Data
| small ⌀ D3 | 15 mm | |
| large ⌀ D2 | 35 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | Manufacturer’s standard | |
| Taper ratio | 1:10 | |
| Through-coolant | no | |
| Application for type of drilling | for through holes | |
| Flute length Lc | 200 mm | |
| Overall length L | 250 mm | |
| Shank square □ | 22.4 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 161000 15X35 | |
| EAN / GTIN | 4045197088833 | |
| Manufacturer number | 161000 15X35 |
Application Table
N
P
P
P
Description
Version:
Straight fluted hand reamer with conically increasing cutting edges (1 mm over 10 mm length).
Application:
For reaming conical holes or uninterrupted holes prepared in steps. Not for parallel holes.