{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master TM plain shank thread mill 2×D M20
Article no.: 139640 M20
Article code:
- Thread type: M; M-LH
- Flank angle: 60
- Tool material: Solid carbide
- Thread standard: DIN 13
- Shank: DIN 6535 HA to h6
Product details
Technical Data
| Thread size | M20 | |
| Coating | TiAlN | |
| Thread type | M; M-LH | |
| Flank angle | 60 degrees | |
| Tool material | Solid carbide | |
| Thread standard | DIN 13 | |
| Shank | DIN 6535 HA to h6 | |
| Thread pitch | 2.5 mm | |
| Nominal ⌀ DC | 13.95 mm | |
| Flute length Lc | 41.25 mm | |
| Shank length Ls | 45 mm | |
| Overall length L | 102 mm | |
| Shank ⌀ Ds | 14 mm | |
| Through-coolant | yes | |
| No. of teeth Z | 6 | |
| Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | |
| Spacing of the cutters | unequal spacing | |
| Feed fz in steel < 750 N/mm2 | 0.13 mm | |
| Shank tolerance | h6 | |
| Number of clamping slots | 6 | |
| Colour ring | green | |
| Internal/external application | Indvendig | |
| Thread depth | 41.25 mm | |
| Series | Master TM | |
| Type of product | thread milling cutter |
Identification numbers & Classifications
| Article number | 139640 M20 | |
| EAN / GTIN | 4045197957542 | |
| Manufacturer number | 139640 M20 |
Application Table
N
220
N
220
N
180
P
140
P
130
P
120
P
90
P
80
H
45
H
85
H
50
M
82
M
75
S
50
K
120
N
200
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Through-coolant feed ≥ M4
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- New coating for optimum wear resistance.
- Corrected thread profile for avoidance of profile distortions.
Through-coolant feed ≥ M4
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
GARANT Master TM plain shank thread mill 2×D M20 |
|||
| Number of clamping slots | 6 | 4 | 6 |
| Overall length L | 102 | 90 | 112 |
| Thread pitch | 2.5 | 2.5 | 2.5 |
| Through-coolant | yes | yes | yes |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA with h6 | DIN 6535 HA to h6 |
| No. of teeth Z | 6 | 4 | 6 |
| Shank ⌀ Ds | 14 | 16 | 14 |