{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 111100 1
Centre drill HSS-E-PM A 1 mm
Article no.: 111105 1
Article code:
- Tool material: HSS E PM
- Norm: DIN 333
- Type: A
- Tolerance nominal ⌀: k12
- Countersink angle: 60
Product details
Technical Data
| Coating | TiAlN | |
| Tool material | HSS E PM | |
| Norm | DIN 333 | |
| Type | A | |
| Tolerance nominal ⌀ | k12 | |
| Countersink angle | 60 degrees | |
| Cutting direction | right-hand | |
| Shank | Parallel shank to h7 | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Nominal ⌀ DC | 1 mm | |
| for workpiece ⌀ | 6 − 8 mm | |
| Shank ⌀ Ds | 3.15 mm | |
| Shank tolerance | h7 | |
| Overall length L | 31.5 mm | |
| Feed f in steel < 900 N/mm2 | 0.02 mm/rev. | |
| Colour ring | without | |
| Type of product | Centre drill |
Identification numbers & Classifications
| Article number | 111105 1 | |
| EAN / GTIN | 4045197797179 | |
| Manufacturer number | 111105 1 |
Application Table
N
100
N
60
N
40
P
60
P
50
P
40
P
20
P
10
H
5
M
15
M
10
S
8
K
40
N
80
Description
Version:
Ground from solid and relief ground, spiral fluted.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Centre drill HSS-E-PM A 1 mm |
|||||
| Colour ring | without | without | without | without | without |
| Overall length L | 31.5 | 31.5 | 31.5 | 35 | 31.5 |
| Nominal ⌀ DC | 1 | 1 | 1 | 1 | 1 |
| Norm | DIN 333 | DIN 333 | DIN 333 | DIN 333 | DIN 333 |
| Shank | Parallel shank to h7 | Parallel shank to h7 | Parallel shank to h7 | Parallel shank to h7 | Parallel shank to h7 |
| Shank tolerance | h7 | h7 | h7 | h7 | h7 |
| Countersink angle | 60 | 60 | 60 | 60 | 60 |