{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Fresa angular 90° GARANT Softcut® MTC 20/2L mm
Número de artículo: 215565 20/2L
Código del artículo:
- Setting angle κ: 90
- Milling application: End milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Detalles de producto
Datos técnicos
| Series | Softcut® | |
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 30 mm | |
| Overall length Ltot | 160 mm | |
| Shank ⌀ Ds h6 | 18 mm | |
| ⌀ D3 | 17 mm | |
| Circular interpolation milling ⌀ Dmin | 37 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Circular interpolation milling ap | 1.7 mm | |
| Ramping angle αmax | 1.19 degrees | |
| Ramping length L for αmax | 14.5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Números de identificación y clasificaciones
| Número de artículo | 215565 20/2L | |
| EAN / GTIN | 4045197409034 | |
| Número del fabricante | 215565 20/2L |
Descripción
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless steels.
Spare part:
Pack of insert screws No. 219826 (8IP; 2.2 Nm).