{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Roughing end mill HSS-PM 25 mm
Número de artículo: 192860 25
Código del artículo:
- Tool material: HSS PM
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: ±0.12
- No. of teeth Z: 6
Detalles de producto
Datos técnicos
| Cutting edge ⌀ DC | 25 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | ±0.12 | |
| No. of teeth Z | 6 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 45 mm | |
| Overhang length L1 incl. recess | 64 mm | |
| Recess ⌀ D1 | 24.5 mm | |
| Overall length L | 121 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.052 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Números de identificación y clasificaciones
| Número de artículo | 192860 25 | |
| EAN / GTIN | 4045197108616 | |
| Número del fabricante | 192860 25 |
Tablas de Aplicación
N
138
P
83
P
64
P
64
P
37
P
32
M
23
M
18
K
55
N
110
Descripción
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.
Descargas y documentos
Comparar con productos similares
Este artículo |
Recomendaciones |
|
|---|---|---|
Roughing end mill HSS-PM 25 mm
a petición
En stock
92 piezas en stock
£312.70
más IVA en la tarifa actual
Gastos de envío no incluidos
|
a petición
En stock
25 piezas en stock
£135.57
más IVA en la tarifa actual
Gastos de envío no incluidos
|
|
| Colour ring | green | without |
| Milling profile | HR | HR |
| Overall length L | 121 | 121 |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Tolerance nominal ⌀ | ±0.12 | k12 |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.052 | 0.052 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical |