{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Pallet add-on rack, Depth 1100 mm, Height: 3000mm
Article no.: 991207 3000
Article code:
Click to enlarge image
Click to enlarge image
Basic rack and extension rack
Click to enlarge image
Application example
Click to enlarge image
- Shelf load capacity / maximum distributed shelf load (on metal): 1,545
- To take pallets with load capacity: 515
- Height adjustment interval: 50
- Type of installation: Plug-in racking
- Colour selection: RAL 5010, 2004
Product details
Technical Data
| Shelf load capacity / maximum distributed shelf load (on metal) | 1,545 kg | |
| To take pallets with load capacity | 515 kg | |
| Height adjustment interval | 50 mm | |
| Type of installation | Plug-in racking | |
| Colour selection | RAL 5010, 2004 | |
| Height | 3,000 mm | |
| Depth | 1,100 mm | |
| Assembled size add-on rack width | 2,786 mm | |
| Compartment width | 2,700 mm | |
| Number of rack stiles | 1 | |
| Number of storage level | 3 | |
| Number of pallet slots per bay | 9 | |
| Shelf load capacity | 1,545 kg | |
| Bay load (3 bays each with 2 pairs of cross beams per bay) | 5,320 kg | |
| Rack installation | Extension rack | |
| Frame profile | S610-M18-U | |
| Cross-beam type: | LNS 100×50×1.5 | |
| Rack access | double-sided | |
| Plug-in assembly | yes | |
| Customer assembly | yes | |
| Type of product | Pallet racking |
Identification numbers & Classifications
| Article number | 991207 3000 | |
| EAN / GTIN | 4058255110117 | |
| Manufacturer number | 46907-N |
Description
Version:
Basic rack consisting of 2 profile frames each with 4 floor anchors and 2 or 3 cross beam pairs. Add-on rack consisting of 1 profile frame with 4 floor anchors and 2 or 3 cross beam pairs. Additional storage levels can be found under accessories.
Cross beams type LNS 100×50×1.5.
Assembled size of extension rack: 2786 mm
Cross beams type LNS 100×50×1.5.
Assembled size of extension rack: 2786 mm
Description:
Assembled size:
Overall length of the rack:
For frame stiles S610-M18-U and S625-A18:
Nominal length + number of stiles × 86 mm (for S610-M18-U)
Nominal length + number of stiles × 110 mm (for S625-A18).
Overall length of the rack:
For frame stiles S610-M18-U and S625-A18:
Nominal length + number of stiles × 86 mm (for S610-M18-U)
Nominal length + number of stiles × 110 mm (for S625-A18).
Colour:
Stiles similar to RAL 5017 traffic blue, cross beams similar to RAL 2004 pure orange powder-coated.
Note:
- On uneven floors we recommend additional shim plates.
- Supplied for self-assembly, saving freight costs. Delivered unassembled.
- Allow at least 100 mm for the foot plates between the frame stiles and walls or parts of the building.
When fitting cross-beams, make sure that the outer stiles project at least 500 mm above the topmost storage level. Within the row of racking, a projection of 100 mm is sufficient.
Technical provisions for erection of pallet racking according to BGR 234:
- End stiles adjacent to gangways and traffic routes must be at least 500 mm higher that the highest storage level.
- Pass-throughs and spans must be provided with a closure board (e.g. chipboard sheet).
- Clear pass-through height must be at least 2100 mm.
- End stiles and pass-throughs must be fitted with crash barriers.
- Single-sided racking that is free-standing in a room must be fitted with mesh rear panels to prevent stored goods falling out.
- Each row of racking must carry safe working load signs.
- Concrete grade: at least C20/25 to EN 206-1 (DIN 1045-2); concrete thickness at least 200 mm.
- If the distance between pallets in a double-sided rack is less than 100 mm, insertion stops should be provided.
Further information on planning and design:
- An important factor is the unsupported length (K) = the maximum distance between floor and the upper edge of the first cross-beam. The stile type is determined by this factor.
- Approx. 100 mm clearance should always be allowed to the next storage level, or the shop ceiling.
- Lift height of the handling equipment: top of the uppermost cross beam plus 200 mm.