{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Rear panel / storage shelf single-piece, suitable for worktop length: 2000mm
Article no.: 927140 2000
Article code:
Click to enlarge image
Click to enlarge image
Application example with 4 pcs. No. 927140
Click to enlarge image
Click to enlarge image
- Shelf load capacity / maximum distributed shelf load (on metal): 100
- Colour selection: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Product details
Technical Data
| Material thickness | 1 mm | |
| Shelf load capacity / maximum distributed shelf load (on metal) | 100 kg | |
| Colour selection | RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003 | |
| Width | 1,900 mm | |
| Depth | 300 mm | |
| Load capacity, distributed | 100 kg | |
| Storage shelf version | Multifunktion | |
| Weight | 7.2 kg | |
| Type of product | Storage shelf |
Identification & Classification
| Article number | 927140 2000 | |
| EAN / GTIN | 4062406107901 | |
| Manufacturer number | 927140 2000 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Rear panel or storage shelf of folded sheet metal. For fitting between 2 support legs. Installation as a rear panel provides a modesty board and additional stabilisation. The stated distributed load capacity is applicable when installed as a storage shelf.
Suitable for:
Support legs No. 927000.
Supplied with:
Fastening material.
Colour:
Light grey RAL 7035, powder-coated.
Note:
In order to use the full depth of the workbench as a storage shelf, the two-part storage shelf must be installed. If a storage shelf is installed without a rear panel, additional stabilising plates No. 927122 must be fitted. If fitted as a rear panel no stabilising plates are required.
Not suitable for Ready-to-go workbenches.
Not suitable for Ready-to-go workbenches.
Warning:
Bestimmungsgemäße Verwendung
- Rückwand oder Ablageboden zur Montage an Fußteil der GridLine vario Werkbank.
- Montage als Ablageboden nur in Kombination mit Knotenblechen Nr. 971722.
- Größe 1000 zur Montage als Rückwand an Eck-Stützfuß.
- Ablageboden zur Aufbewahrung von Werkstücken und Werkzeugen.
- Rückwand als Sichtschutz und zur Stabilisierung der Werkbank.
- Nur an Werkbank mit zwei Fußteilen montieren.
- Nur an entsprechenden Bohrungen montieren.