{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Absolute dial indicator 0.01 mm reading 25 mm
Article no.: 434065 25
Article code:
Click to enlarge image
Display can be rotated up to 330°.
Click to enlarge image
Display can be rotated up to 330°.
- Standard: Works standard
- Interface: USB interface; USB interface
- IP Index of Protection: IP 42
- Measured value saving: Once-off setting of the zero position
Product details
Technical Data
| Standard | Works standard | |
| Measuring range | 0 mm - 25 mm | |
| Scale divisions | 0.01 mm | |
| Height of numerals | 11 mm | |
| Display backlit | no | |
| Measurement variation E MPE (measurement range) | 0.02 mm | |
| Interface | USB interface; USB interface | |
| IP Index of Protection | IP 42 | |
| Gauging force | ≤1.8 N | |
| Clamping shank ⌀ h6 | 8 mm | |
| Clamping shank length | 19.5 mm | |
| Measured value saving | Once-off setting of the zero position | |
| Preset function | yes | |
| Measurement technology | digital | |
| Body ⌀ | 59 mm | |
| Thickness of housing | 44.2 mm | |
| Power supply | Battery-powered | |
| Number of batteries contained | 1 | |
| Battery type | Button cell | |
| Article no of the battery / rechargeable battery fitted | 081560 CR2032 | |
| Type of product | dial gauge | |
| On/Off switch | yes |
Identification numbers & Classifications
| Article number | 434065 25 | |
| EAN / GTIN | 4946368850290 | |
| Manufacturer number | 543-725B |
Description
Version:
A multifunctional standard dial indicator. Reliable and easy to use.
- Bidirectional communication is possible, e.g. for parameterisation via PC (Digimatic S1 interface).
- With ABSOLUTE system. One-off setting of the start position, which remains the absolute zero point until the battery has to be replaced.
- Easy reading of the values due to a large digital/analogue display.
- Model available with digital digit increments of 0.5 µm.
- Simple calculations and peak value identification are possible.
- Equipped with a warning function for the calibration plan.
- The GO/±NG assessment is performed by adjusting the upper and lower tolerance.
- Alarm for low voltage, setting error, sensor error, display overflow etc.
- Display can be rotated 330°.
- A function lock protects the dial indicator against unauthorised use.
Function:
IP42: Protected against water falling obliquely (dripping water) up to 15° relative to normal operating position and protected against penetration by foreign bodies with ⌀ > 1 mm However, tools and wires should be kept away.
Cutting data:
- Absolute linear encoder with electrostatic capacity.
- Measuring frequency (MAX/MIN/RANGE): 50× per second.
- Shank diameter: 8 mm.
- Measuring probe: carbide ball, thread M2.5×0.45.
- Battery life: approx. 2700 hours with continuous operation.
Supplied with:
Digital dial indicator including 1 pc. CR2032 battery.