Version:
- Embossing materials up to 45 HRC (tensile strength 1450 N/mm2) possible.
- Max. Embossing force 180kN (18 t), linear embossing force progression.
- Adjustment of the pneumatic embossing pressure between 0.5 and 6.5 bar.
- Quick adjustment at 30 mm intervals.
- Fine adjustment by knurled screw.
- Everything mounted on a base plate – conforms to CE, can be used safely and in a compact manner as a single unit.
- The operating button is directly on the embossing station and thus there are no pneumatic hoses outside the station.
Embossing technology, also known as pre-embossing, is a technology in which the workpiece to be clamped is provided with a defined contour outside the machine tool before it is positively clamped in a vice. Clamping situations that require high holding forces and where there is a risk of deformation on the workpiece in particular can be mastered with good process reliability through pre-stamping. Embossing technology is an optimum solution especially for 5-face machining where optimum accessibility is required.
Advantage:
Positive clamping in gripper jaws even at low clamping force
Application:
For pre-embossing especially hard or unstable components.
Supplied with:
Base plate, pressure converter, embossing station, protection plate, stamping jaws, workpiece backstop, support strip.
Optional extras:
Centre marking No.
362934 size 1, checking set for stamping jaw wear No.
362936 size 1.