{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving lathe centre with carbide insert and draw-off nut 2
Article no.: 321250 2
Article code:
Product details
Technical Data
| Morse taper | MT2 | |
| Body ⌀ D | 45 mm | |
| Reach B | 65 mm | |
| Carbide ⌀ H | 11 mm | |
| maximum radial run-out | 0.005 mm | |
| for workpiece weight | 120 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 321250 2 | |
| EAN / GTIN | 4019208059617 | |
| Manufacturer number | 221021 |
Description
Version:
- Tip angle 60°.
- With carbide tip for small centres and draw-off nut.
- Body and live centre are hardened (multiple regrinding possible).
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For machining thin components at high speeds.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Revolving lathe centre with carbide insert and draw-off nut 2
on request
Unknown
0 pieces in stock
€731.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
€223.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
€267.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| for workpiece weight | 120 | 200 | 140 |
| Body ⌀ D | 45 | 45 | 45 |
| maximum radial run-out | 0.005 | 0.005 | 0.005 |
| Morse taper | MT2 | MT2 | MT2 |
| Reach B | 65 | 76 | 87 |
| largest centre point ⌀ 60° A | 20 | 20 | |
| Type of product | Centring drill | Centring drill | Centring drill |