{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving lathe centre high precision version Point angle 60° 5
Article no.: 320700 5
Article code:
Product details
Technical Data
| Morse taper | MK5 | |
| Body ⌀ D | 62 mm | |
| Reach B | 51 mm | |
| largest centre point ⌀ 60° A | 54 mm | |
| maximum radial run-out | 0.003 mm | |
| for workpiece weight | 1,300 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320700 5 | |
| EAN / GTIN | 4045197313263 | |
| Manufacturer number | 5WP |
Description
Version:
- Extremely slim body and high concentricity.
- Precision needle and thrust bearings result in a maximum variation of 0.003 mm and a very small body ⌀.
- Taper and chamfered parts are made of hardened bearing steel (61 − 63 Rockwell).
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For turning and grinding where a small head ⌀ and high accuracy are required.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Revolving lathe centre high precision version Point angle 60° 5
on request
In stock
22 pieces in stock
€1,081.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
€1,643.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| for workpiece weight | 1,300 | 1,200 |
| Body ⌀ D | 62 | 72 |
| maximum radial run-out | 0.003 | 0.003 |
| Morse taper | MK5 | MK5 |
| Reach B | 51 | 136 |
| largest centre point ⌀ 60° A | 54 | |
| Type of product | Centring drill | Centring drill |