{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving lathe centre 60° 5
Article no.: 320660 5
Article code:
Product details
Technical Data
| Morse taper | MK5 | |
| Body ⌀ D | 88.5 mm | |
| Reach B | 129 mm | |
| largest centre point ⌀ 60° A | 40 mm | |
| maximum radial run-out | 0.005 mm | |
| for workpiece weight | 2,000 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320660 5 | |
| EAN / GTIN | 4019208014364 | |
| Manufacturer number | 042843 |
Description
Version:
- Body and live centre hardened.
- Live centre through hardened, multiple regrinding possible.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- Point angle 60°.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For all types of lathe, equally suitable for roughing and finish turning.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Revolving lathe centre 60° 5
on request
In stock
10 pieces in stock
531,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
446,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| for workpiece weight | 2,000 | 2,000 |
| Body ⌀ D | 88.5 | 78 |
| maximum radial run-out | 0.005 | 0.005 |
| Morse taper | MK5 | MK5 |
| Reach B | 129 | 118 |
| largest centre point ⌀ 60° A | 40 | 32 |
| Type of product | Centring drill | Centring drill |