{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Quick-change lathe tool post AA
Article no.: 318000 AA
Article code:
Product details
Technical Data
| Type | AA | |
| maximum drive power of lathe | 1.104 kW | |
| maximum cross slide width SB | 80 mm | |
| maximum turning tool height h | 12 mm | |
| Bore ⌀ of the head | 13 mm | |
| Bore ⌀ of the centering plate | 10 mm | |
| Width | 70 mm | |
| Height | 37 mm | |
| maximum reach A | 30 mm | |
| Type of product | Steel toolholder |
Identification numbers & Classifications
| Article number | 318000 AA | |
| EAN / GTIN | 4045197315687 | |
| Manufacturer number | K 00 |
Description
Application:
Place the lathe tool post with its surface-ground face on to the cross slide in a horizontal position and clamp it. To do this, the bore of the centring plate must have been turned beforehand. Alignment is performed with the boring bar and boring bar holder clamped in position, aligned at right angles to the face plate. Then adjust the pointer to the zero mark of the cover disc and tighten the T-bolt securely. For precision lathe work or heavy roughing cuts, it is advisable to secure the post with two dowel pins. The holes are pre-drilled.