{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Tirette 45° étanche 40
Article no.: 308765 40
Article code:
- Norme pour les tirettes: MAS 403
Product details
Technical Data
| Pour cône | 40 | |
| Propriété de l'alésage | avec alésage | |
| Norme pour les tirettes | MAS 403 | |
| ⌀ moyeu D | 23 mm | |
| ⌀ tête D1 | 15 mm | |
| Longueur totale L | 60 mm | |
| L1 | 35 mm | |
| Filetage M | M16 | |
| Couple de serrage maximal | 50 Nm | |
| Pour cône SA avec code couleur | SA 40 | |
| Ouverture | 19 mm | |
| Type de produit | Tirettes |
Identification numbers & Classifications
| Article number | 308765 40 | |
| EAN / GTIN | 4045197532756 | |
| Manufacturer number | 308765 40 |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.