{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Pull stud sealed, form A, with bore, suitable for steep tapers: 50
Article no.: 308610 50
Article code:
- Pull stud standard: ISO 7388-3
Product details
Technical Data
| suitable for steep tapers | 50 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 36 mm | |
| Head ⌀ D1 | 28 mm | |
| Overall length L | 74 mm | |
| L1 | 34 mm | |
| Thread M | M24 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 150 Nm | |
| suitable for taper arbors with colour code | SK 50 | |
| Width across flats | 30 mm | |
| Type of product | Pull Stud |
Identification numbers & Classifications
| Article number | 308610 50 | |
| EAN / GTIN | 4045197150936 | |
| Manufacturer number | 308610 50 |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
Sealed − with O-ring.
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.