{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DC.T 070202 SW05
Article no.: 260381 SW05
Article code:
Product details
Technical Data
| ISO code indexable insert | DCMT 070202 | |
| Corner radius | 0.2 mm | |
| Grade | SW05 | |
| Tool material | Carbide | |
| Main application | Ti | |
| Cutting conditions | continuous | |
| Chip breaker | MQ | |
| Tolerance | M | |
| Cutting depth ap | 0.1 mm - 1 mm | |
| Feed f | 0.05 mm/rev. - 0.2 mm/rev. | |
| Cutting speed vc main application | 40 m/min - 100 m/min | |
| Number of changes/inserts | 2 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 260381 SW05 | |
| EAN / GTIN | 4960664629596 | |
| Manufacturer number | TWH01820 |
Application Table
S
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
DC.T 070202 SW05
on request
In stock
65 pieces in stock
€7.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
472 pieces in stock
from
1
Pieces
€9.96
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€8.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
621 pieces in stock
from
1
Pieces
€9.96
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€8.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
544 pieces in stock
from
1
Pieces
€9.96
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€8.30
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of changes/inserts | 2 | 2 | 2 | 2 |
| ISO code indexable insert | DCMT 070202 | DCMT 070202 | DCMT 070202 | DCMT 070202 |
| Finishing/roughing assignment | Finishing | Finishing | Finishing | Finishing |
| Cutting depth ap | 0.1 mm - 1 mm | 0.2 mm - 1.5 mm | 0.2 mm - 1.5 mm | 0.2 mm - 1.5 mm |
| Grade | SW05 | HB7010-1 | HB7120-1 | HB7415-1 |
| Feed f | 0.05 mm/rev. - 0.2 mm/rev. | 0.05 mm/rev. - 0.2 mm/rev. | 0.1 mm/rev. - 0.3 mm/rev. | 0.05 mm/rev. - 0.3 mm/rev. |
| Tolerance | M | M | M | M |