{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | DNMG 150608 | |
Corner radius | 0.8 mm | |
Grade | CA6525 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | MS (brass) | |
Cutting depth ap | 0.7 mm - 4 mm | |
Feed f | 0.1 mm/rev. - 0.35 mm/rev. | |
Cutting speed vc main application | 60 m/min - 220 m/min | |
Number of changes/inserts | 4 | |
Finishing/roughing assignment | Semi-roughing | |
Type of product | Indexable insert for turning |
Article number | 250797 CA6525 | |
EAN / GTIN | 4960664471744 | |
Manufacturer number | TJV02509 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() DNMG 150608 CA6525
on request
In stock
494 pieces in stock
17,18 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,069 pieces in stock
10,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,070 pieces in stock
from
1
Pieces
17,28 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
14,40 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of changes/inserts | 4 | 4 | 4 |
Corner radius | 0.8 mm | 0.8 mm | 0.8 mm |
Finishing/roughing assignment | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Finishing |
Tool material | Carbide | Carbide | Carbide |
Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted |
Cutting depth ap | 0.7 mm - 4 mm | 0.5 mm - 5 mm | 0.5 mm - 5 mm |
Chip breaker | MS (brass) | MM | VM |