{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
CNMG 120404 CA315
Article no.: 250210 CA315
Article code:
Product details
Technical Data
| ISO code indexable insert | CNMG 120408 | |
| Corner radius | 0.8 mm | |
| Grade | CA315 | |
| Tool material | Carbide | |
| Coating | coated | |
| Main application | O | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | KG | |
| Cutting depth ap | 0.5 mm - 4 mm | |
| Feed f | 0.15 mm/rev. - 0.5 mm/rev. | |
| Cutting speed vc main application | 150 m/min - 350 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 250210 CA315 | |
| EAN / GTIN | 4960664798469 |
Application Table
K
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
CNMG 120404 CA315
on request
In stock
30 pieces in stock
from
1
Pieces
€15.00
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€12.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
757 pieces in stock
from
1
Pieces
€10.68
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€8.90
plus VAT at the current rate
Prices plus delivery costs
|
|
| Finishing/roughing assignment | Finishing | Skrubbearbejdning-sletbearbejdning |
| Tool material | Carbide | Carbide |
| Cutting conditions | slightly interrupted | slightly interrupted |
| Grade | CA315 | HB7210-1 |
| Feed f | 0.15 mm/rev. - 0.5 mm/rev. | 0.3 mm/rev. - 0.7 mm/rev. |
| Main application | O | K |
| Type of product | Indexable insert for turning | Indexable insert for turning |