{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KUB Pentron® indexable drill ABS® shank 45 mm
Article no.: 236604 45
Article code:
- Drill depth for indexable insert drill up to: 5×D
- Shank: ABS
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | KUB Pentron® | |
| Nominal ⌀ D | 45 | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ABS | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 225 mm | |
| Overhang LA | 271 mm | |
| ABS® shank ⌀ Ds | 63 mm | |
| ISO code indexable insert | SOGX 130508 46-... | |
| Pack of insert screws | 239652 20IP (6.3 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 236604 45 | |
| EAN / GTIN | 4047109204683 | |
| Manufacturer number | U45 64500 |
Description
Version:
Bore tolerance: D − 0.1 / + 0.35
Application:
Recommendation:
When spot-drilling reduce the feed rate to 70%.
Note:
- For use only under stable machining conditions.
- Version 2×D and 3×D with ABS® shank available on request.
- Offset-axis drilling up to Vmax = 0.25 mm.
- Maximum ⌀ = D + 0.5 mm achievable by offsetting.
- Version with PSC shank available on request.