{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | HOLEX Pro | |
Nominal ⌀ D | 40 | |
Drill depth for indexable insert drill up to | 2×D | |
Shank | ISO 9766 | |
Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling | |
Through-coolant | yes | |
Machining strategy | HPC | |
Reach L1 | 84 mm | |
Overhang LA | 116 mm | |
Shank ⌀ Ds | 40 mm | |
Shank length Ls | 70 mm | |
Maximum adjustment limit Vmax | 0.35 mm | |
ISO code indexable insert | SOMT13M510 / XOMT13M506 | |
Pack of insert screws | 232980 6 (TX15;3Nm) | |
Number of cutting edges Z | 1 | |
Overall length L | 186 mm | |
Type of product | Indexable drill |
Article number | 235000 40 | |
EAN / GTIN | 4062406253028 | |
Manufacturer number | 235000 40 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() HOLEX Pro Drill indexable drill Combination shank 40 mm
on request
In stock
11 pieces in stock
401,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
314,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
490,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 1 | 1 | 1 |
Drill depth for indexable insert drill up to | 2×D | 2×D | 2×D |
Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling |
Through-coolant | yes | yes | yes |
ISO code indexable insert | SOMT13M510 / XOMT13M506 | WOEX 06T304 | SOGX 130511 |
Shank | ISO 9766 | DIN 6535 HE, DIN 6595 | ISO 9766 |
Shank length Ls | 70 mm | 60 mm | 68 mm |