{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC11T, with threaded shank, ⌀ D / number of teeth Z: 16/2mm
Article no.: 227315 16/2
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | with threaded shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 10 mm | |
| Overall length Ltot | 25 mm | |
| Mounting thread M | M8 | |
| ⌀ D3 | 10 mm | |
| Circular interpolation milling ⌀ Dmin | 26 mm | |
| Circular interpolation milling ⌀ Dmax | 30 mm | |
| Ramping angle αmax | 1.27 degrees | |
| Ramping length L for αmax | 9 mm | |
| suitable indexable insert | BD.. 11T3 | |
| Insert screw | 229708 (T8; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227315 16/2 | |
| EAN / GTIN | 4960664672899 | |
| Manufacturer number | THN03504 |
Description
Description:
MEC11T mill type with higher stability due to lower number of cutters than MECX. This enables higher feed rates per cutter.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Indexable milling cutter 90° MEC11T, with threaded shank, ⌀ D / number of teeth Z: 16/2mm
on request
In stock
4 pieces in stock
€223.09
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
€195.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
€194.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
€269.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 | 2 |
| Milling application | Circular milling; Ramping; End milling | Circular milling; Circular milling; Ramping | End milling; Circular milling; Ramping | Corner milling |
| Through-coolant | yes | yes | yes | yes |
| Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
| Cutting edge ⌀ DC | 16 mm | 16 mm | 16 mm | 16 mm |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |