{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Chamfer mill 45°, Weldon shank, Type: 30
Article no.: 216625 30
Article code:
- Chamfering angle reverse: 45
- Through-coolant: no
Product details
Technical Data
| Shank type | Weldon shank | |
| Chamfering angle reverse | 45 degrees | |
| Through-coolant | no | |
| Number of cutting edges Z | 3 | |
| ⌀ D | 30 mm | |
| maximum chamfering ⌀ Dmax | 42.3 mm | |
| Overhang L1 | 32 mm | |
| Overall length Ltot | 100 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| suitable indexable insert | SP..09T308 | |
| Pack of insert screws | 219841 (15IP; 3.0 Nm) | |
| Type of product | Indexable end mill |
Identification numbers & Classifications
| Article number | 216625 30 | |
| EAN / GTIN | 4045197941244 | |
| Manufacturer number | 216625 30 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Chamfer mill 45°, Weldon shank, Type: 30
on request
In stock
5 pieces in stock
€245.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
€587.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 3 | 5 |
| Overhang L1 | 32 mm | 30 mm |
| Overall length Ltot | 100 mm | 140 mm |
| maximum chamfering ⌀ Dmax | 42.3 mm | 45.8 mm |
| suitable indexable insert | SP..09T308 | SD.. 090308 |
| Shank ⌀ Ds h6 | 20 mm | 25 mm |
| Type of product | Indexable end mill | Indexable end mill |