{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Power Tang | |
Cutting edge ⌀ DC | 20 mm | |
Number of cutting edges Z | 2 | |
Shank type | Weldon shank | |
Setting angle κ | 90 degrees | |
Milling application | Corner milling | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
maximum cutting depth ap max | 8 mm | |
Overhang L1 | 30 mm | |
Overall length Ltot | 101 mm | |
Shank ⌀ Ds h6 | 20 mm | |
suitable indexable insert | LO.U0904.. | |
Pack of insert screws | 219868 2 (8IP; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 215950 20/2 | |
EAN / GTIN | 4045197939807 | |
Manufacturer number | 215950 20/2 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
GARANT Power Tang 90° tangential high-performance shoulder mill wide pitch, Weldon shank, ⌀ D / number of effective cutting edges Z: 20/2mm
on request
In stock
10 pieces in stock
€321.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
56 pieces in stock
€269.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
93 pieces in stock
€263.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€285.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
€337.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
47 pieces in stock
€176.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
€310.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Overall length Ltot | 101 mm | 90 mm | 90 mm | 90 mm | 90 mm | 90 mm | 90 mm |
suitable indexable insert | LO.U0904.. | AP.. 1335.. | AP.. 1003.. | AP.. 1003.. | LO.U0904.. | AP.. 1003.. | XNEX 040308 |
Shank type | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank |
Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
Pack of insert screws | 219868 2 (8IP; 1.2 Nm) | 219826 (8IP; 2.2 Nm) | 219814 (8IP; 1.2 Nm) | 219814 (8IP; 1.2 Nm) | 219868 2 (8IP; 1.2 Nm) | 219814 (8IP; 1.2 Nm) | 219878 1 (7IP; 1.2 Nm) |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Shank ⌀ Ds h6 | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |