{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 2 | |
Shank type | Weldon shank | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
Machining strategy | MTC | |
Tool exchange | PowerCard | |
Overhang L1 | 55 mm | |
Overall length Ltot | 170 mm | |
Shank ⌀ Ds h6 | 25 mm | |
⌀ D3 | 22 mm | |
Circular interpolation milling ⌀ Dmin | 47 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Ramping angle αmax | 0.72 degrees | |
Ramping length L for αmax | 19.85 mm | |
suitable indexable insert | AP.. 1003.. | |
Pack of insert screws | 219814 (8IP; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 215800 25/2L | |
EAN / GTIN | 4045197281197 | |
Manufacturer number | 215800 25/2L |
This article |
Recommendations |
|||
---|---|---|---|---|
Shoulder mill 90°, Weldon shank, ⌀ D / number of teeth Z: 25/2Lmm
on request
In stock
2 pieces in stock
€275.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
€292.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
33 pieces in stock
€304.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
€284.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 | 4 | 2 |
Milling application | Circular milling; Ramping; End milling | Corner milling; Circular milling; Ramping | Corner milling; Circular milling; Ramping | End milling; Circular milling; Ramping |
Overall length Ltot | 170 mm | 200 mm | 40 mm | 180 mm |
Through-coolant | yes | no | yes | yes |
suitable indexable insert | AP.. 1003.. | AP.. 1805.. | AP.. 1805.. | AP.. 1335.. |
Cutting edge ⌀ DC | 25 mm | 25 mm | 40 mm | 25 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill |