{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Softcut® | |
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 4 | |
Shank type | Weldon shank | |
Setting angle κ | 90 degrees | |
Milling application | End milling; Circular milling; Ramping | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Machining strategy | MTC | |
Tool exchange | PowerCard | |
Overhang L1 | 49 mm | |
Overall length Ltot | 105 mm | |
Shank ⌀ Ds h6 | 25 mm | |
⌀ D3 | 22 mm | |
Circular interpolation milling ⌀ Dmin | 47 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Circular interpolation milling ap | 1.9 mm | |
Ramping angle αmax | 0.88 degrees | |
Ramping length L for αmax | 19.5 mm | |
suitable indexable insert | AP.. 1335.. | |
Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
Type of product | End / face mill |
Article number | 215560 25/4 | |
EAN / GTIN | 4045197408952 | |
Manufacturer number | 215560 25/4 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
GARANT Softcut 90° shoulder mill MTC, Weldon shank, ⌀ D / number of teeth Z: 25/4mm
on request
In stock
25 pieces in stock
€349.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
€327.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3 pieces in stock
€324.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
€373.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
€361.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
€217.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
39 pieces in stock
€342.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Milling application | End milling; Circular milling; Ramping | Circular milling; Ramping; End milling | End milling | Corner milling | Corner milling | End milling | Ramping |
Overall length Ltot | 105 mm | 105 mm | 110 mm | 105 mm | 105 mm | 105 mm | 100 mm |
Shank type | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank |
Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Shank ⌀ Ds h6 | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |