{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable face / shoulder mill 90°, with bore, ⌀ D / number of teeth Z: 63/6mm
Article no.: 215050 63/6
Article code:
- Setting angle κ: 90
- Milling application: End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 6 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | SOMT 09T304 | |
| Pack of insert screws | 219810 (9IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215050 63/6 | |
| EAN / GTIN | 4045197132642 | |
| Manufacturer number | 215050 63/6 |
Description
Version:
Made of hardened special steel for low vibration and long life. Very good surface finishes are obtained due to projecting flat cutting edge.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Indexable face / shoulder mill 90°, with bore, ⌀ D / number of teeth Z: 63/6mm
on request
In stock
14 pieces in stock
535,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
444,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
599,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
559,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
643,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
418,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
348,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
114 pieces in stock
375,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
284,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
483,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 6 | 4 | 6 | 6 | 7 | 6 | 6 | 6 | 6 | 6 |
| Mounting bore ⌀ | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm |
| Overall length Ltot | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm |
| Cutting edge ⌀ DC | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm |
| Pack of insert screws | 219810 (9IP; 2.2 Nm) | 219833 (15IP; 3.0 Nm) | 219833 (15IP; 3.0 Nm) | 219863 (8IP; 2.2 Nm) | 219863 (8IP; 2.2 Nm) | 219812 (15IP; 5.0 Nm) | 219810 (9IP; 2.2 Nm) | 219798 1 (15IP; 3.8 Nm) | 219812 (15IP; 5.0 Nm) | 219798 1 (15IP; 3.8 Nm) |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |