{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
FeedKing high feed rate indexable face mill 25/3 mm
Article no.: 212900 25/3
Article code:
- Milling application: Circular milling; Ramping; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: HPC
- Tool exchange: PowerCard
Product details
Technical Data
| Series | FeedKing | |
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Weldon shank | |
| Milling application | Circular milling; Ramping; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 12 mm | |
| maximum cutting depth ap max | 0.85 mm | |
| Overhang L1 | 39 mm | |
| Overall length Ltot | 95 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 37 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Circular interpolation milling ap | 0.85 mm | |
| Ramping angle αmax | 1.56 degrees | |
| Ramping length L for αmax | 11 mm | |
| suitable indexable insert | XD.. 070308 | |
| Pack of insert screws | 219810 (9IP; 2.2 Nm) | |
| Setting angle κ | 10 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212900 25/3 | |
| EAN / GTIN | 4045197320841 | |
| Manufacturer number | 212900 25/3 |
Description
Version:
Dynamic cutting edge geometry for highest feed rates. Extremely smooth cutting due to self-stabilising insert bedding. Optimised geometry for reduced cutting forces, thereby reducing the stress on the main spindle.
Advantage:
Particularly cost-effective due to exceptionally sturdy 4-edge inserts.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
FeedKing high feed rate indexable face mill 25/3 mm
on request
In stock
28 pieces in stock
306,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
251,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Milling application | Circular milling ;Ramping ;Ramping | Circular milling ;End milling |
| Overall length Ltot | 95 | 115 |
| Through-coolant | yes | yes |
| Shank type | Weldon shank | Weldon shank |
| Cutting edge ⌀ DC | 25 | 25 |
| Ramping angle αmax | 1.56 | 3.22 |
| Ramping length L for αmax | 11 | 12.45 |