{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 9 | |
| Shank type | with bore | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 88 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| Circular interpolation milling ⌀ Dmin | 188 mm | |
| Circular interpolation milling ⌀ Dmax | 198 mm | |
| Circular interpolation milling ap | 2.5 mm | |
| Ramping angle αmax | 0.57 degrees | |
| Ramping length L for αmax | 84.94 mm | |
| suitable indexable insert | RD..12T3 | |
| Pack of insert screws | 219805 (15IP; 3.8 Nm) | |
| Set of retaining screws | 219807 (15IP; 3.8 Nm) | |
| Setting angle κ | 15 – 27 degrees | |
| Fz Helix | 0.7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212145 100/9 | |
| EAN / GTIN | 4045197192820 | |
| Manufacturer number | 212145 100/9 |
Description
Version:
Milling body with irregular pitch for smooth cutting.
- High axial run-out accuracy and concentricity
- Stepless repositioning as the cutting edge wears.
Attention:
Retaining screws and retaining washers should not be used for inserts with positive geometry.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Copy mill 0° negative 100/9 mm
on request
In stock
2 pieces in stock
€431.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
€601.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Setting angle κ | 15 – 27 | 15 – 30 |
| Milling application | Circular milling ;Ramping | Circular milling ;Circular milling |
| Through-coolant | yes | yes |
| suitable indexable insert | RD..12T3 | RPK.1204M0T |
| ⌀ D3 | 88 | 88 |
| Ramping length L for αmax | 84.94 | 84.94 |
| Fz Helix | 0.7 | 0.7 |