{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 20 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 42 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | 0.5×D for side milling; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 41 mm | |
Corner radius R1 | 4 mm | |
Overhang length L1 incl. recess | 52 mm | |
Recess ⌀ D1 | 19.8 mm | |
Overall length L | 104 mm | |
Shank ⌀ Ds | 20 mm | |
Feed fz for side milling in short-chipping aluminium | 0.22 mm | |
Feed fz for copy milling in short-chipping aluminium | 0.25 mm | |
Shank tolerance | h6 | |
Colour ring | yellow | |
Type of product | Torus cutter |
Article number | 206255 20/4,0 | |
EAN / GTIN | 4062406156336 | |
Manufacturer number | 206255 20/4,0 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() GARANT Master Alu PickPocket solid carbide torus cutter HPC 20/4,0 mm
on request
In stock
22 pieces in stock
€325.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€286.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
€356.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
€328.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Overhang length L1 incl. recess | 52 mm | 52 mm | 55 mm | 52 mm |
Tolerance nominal ⌀ | e8 | h6 | e8 | h6 |
Type | W | W | N | W |
No. of teeth Z | 3 | 3 | 4 | 3 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Corner radius R1 | 4 mm | 4 mm | 4 mm | 4 mm |
Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm |