{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill MTC 6 mm
Article no.: 205715 6
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: HR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 13 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.15 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.028 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.03 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205715 6 | |
| EAN / GTIN | 4045197549488 | |
| Manufacturer number | 205715 6 |
Application Table
P
155
P
155
P
125
P
110
M
55
M
40
K
110
Description
Version:
Dimensions similar to DIN 6527. Optimised special knuckle profile for roughing. Very high metal removal rate.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide roughing end mill MTC 6 mm
on request
In stock
53 pieces in stock
63,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
85 pieces in stock
85,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
162 pieces in stock
96,80 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 | 45 | 45 |
| Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.028 | 0.028 | 0.028 |
| No. of teeth Z | 4 | 4 | 4 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 6 | 6 | 6 |